Silk Plaster Series Golden, which contributes to heat and sound insulation, is anti-static and does not hold dust. In addition to its easy application, it does not harm human health and the environment due to its water-based structure. Odorless, can be inhaled

Golden can be applied to fine plaster, gypsum plaster, drywall, wooden surfaces and non-alkaline surfaces. It is not applied to glass, brick, metal surfaces, exterior surfaces and wet floors.

Structure: Powder polymer

Consumption: 220-300 (g/m²)

Thinning Ratio: Ready to use

Drying Time: 24 hours

Application Thickness: 1 mm

The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. Primer should be applied to newly plastered surfaces first. On old painted, dirty, damp surfaces, paint, dirt, soot and similar residues on the surface are thoroughly cleaned. Primer is applied after SX 2000 Polish application. After the primer application has dried, silk plaster application can be started. The material in the bag is poured into a container to which approximately 5 liters of water has been added and thoroughly kneaded. Depending on the climate and application conditions, some more water can be added if necessary. After the prepared material has rested for at least 20 minutes, it is applied to the surface with an average of 1 mm thickness using a plaster technique with the help of a plastic trowel. After the application is over, the tools used should be cleaned with water immediately. When application is made to places where deformation is high; It is recommended to add one glass of SX 2000 polish to the material for each bag before the material is kneaded. The surface should not be left unfinished during the application. Application can be done with a plastic trowel and spray gun. . On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

It can be stored for at least 5 years in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bag.

0.9 KG Bag.