Aqua Lasure, which is both varnish and protective, colors the wood without disturbing its natural appearance thanks to its transparent structure. Thanks to the antibacterial extracts in it, it prevents the formation of bacteria, fungus, mold and bedbugs on wood. It protects the wood against UV rays. In addition to its easy penetration to the surface, it is resistant to scratching and abrasion.

Can be applied to all interior and exterior wooden surfaces.

Composition: Urethane Alkyd resin based, transparent.

Consumption: 10-14 (m²/lt), 85-135 (g/m2)

Thinning Rate: 10-15%

Application Tools: Brush, Roller, Airbrush.

Drying: It dries in 6 – 12 hours depending on the wood type.

Viscosity: 75 KU ±10 ( 25 º C )

Density: 0.92 ± 0.02 (g / ml)

All wooden surfaces should be cleaned of oil, dirt and dust, and a dry and clean surface should be prepared by sanding the old paints and varnishes thoroughly. Knots should be burned and thoroughly cleaned. After diluting Aqua Lasure with 5% water, it is applied by brush, roller or spray method in 2 layers at 24 hour intervals.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Flash point 36 ºC

Flammable, harmful if swallowed by inhalation.

Storage life is at least 1 year under room conditions.

15 lt, 2.5 lt, 0.75 lt tin buckets.