Silicones matt, which has high strength and high coverage, is a first class interior paint with a matte appearance developed with silicone technology. It is easily applied to the surface and does not leave a roller mark. It has real erasing feature. Since it is water-based, it does not harm human health and the environment, it can be inhaled. Colors retain their vitality for many years

It can be applied to all old painted surfaces for which the floor has been prepared, interior surfaces such as concrete, plaster, concrete plaster, betopan, glass textile and paintable wallpaper

Structure: Styrene Acrylic

Consumption: Single coat: 13- 17 (m²/lt), 85-130 (g/m2)

Thinner: Water

Thinning Ratio: 10-15%

Drying Time: 15 – 20 minutes to the touch; Dust free 1 hour; Full drying 24 hours

Viscosity: 125 KU ± 10 ( 23 º C )

pH (25oC): 8 – 9

Density: 1.56 ± 0.02 (g/ml)

Solid Matter Amount: 67±2%

Wet Scrubbing Resistance: Class 2 (TS EN 13300)

Covering Power: Class 2 (8m2/lt) (TS EN 13300)

Grain Size: Class S1Fine (TS EN 13300)

Gloss: Class G3 (TS EN 13300)

Resistant to Fungal Growth

Dry Film Thickness: ( 30 ± 5 ) micron

Wet Film Thickness: ( 60 ± 5 ) micron

The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained by applying the primer. If necessary, defects and cracks on the surface should be repaired with Acrylic Putty. Izolac should be used on newly painted and absorbent surfaces, Primer on old painted, dirty or synthetic painted surfaces, and Putty Primer on putty applied surfaces. Silicones matt is diluted 10-15% with clean water and applied in 2 layers by roller, brush or spraying method. Depending on the air temperature between coats, wait at least 2 hours. After the application, the tools used should be cleaned with water immediately. On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. Before the paint is used, it must be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

It can be stored for at least 2 years in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bucket lid..

4 KG, 10 KG, 20K plastic buckets.