Synthetic Products

Picasso Paint

Miofe

  • Product Description:

    It is a corrosion resistant decorative industrial paint. It is an epoxy modified synthetic resin based fast drying top coat paint containing a mixture of micaceous iron oxide and anticorrosive pigment.

  • In addition to its fast drying, it forms a film layer that is resistant to atmospheric humidity and corrosion to which the surface may be exposed due to the pigments in its structure. Since it is a surface tolerant paint, it can be applied to rusty surfaces.

  • Before starting the painting process, clean the surface from dirt, dust, oil and rust, which may be in the form of layers, using a suitable method.

  • Stir the can thoroughly before starting the application. (It is not sufficient to shake the structures without opening the can lid). In case of application with a brush, add 25% by weight Thinner and mix thoroughly until a homogeneous mixture is obtained. Apply 3 coats for new or rusty surfaces and 2 coats for old painted surfaces. Avoid application at ambient temperatures below 5 ⁰C and surface temperatures above 30 ⁰C. 2-3 coats should be applied with an interval of 15-20 minutes between coats. (Application between coats should not exceed 3 hours).

    Drying Time: (25 ⁰C Temperature and 50 % Humidity Conditions)

    Dust holding time: 15-30 minutes;

    Weaving time: 30-60 minutes;

    Hard drying time: 48 hours; Full drying time: 6 weeks

    Consumption: Depending on the nature of the surface to be painted, 10-12 m2 area can be painted with 1 liter of paint.

    Shelf life: 5 years under suitable conditions and in its unopened original package.

  • Picasso Synthetic Primer is applied to the surfaces smoothed with putty. Picasso Primer is applied to surfaces prepared with satin plaster. On wooden floors, Picasso Synthetic Primer is applied after the knots on the surfaces are burned and saturated with Picasso lasur. After cleaning oil, dirt and rust on metal surfaces, anti-rust should be applied. Synthetic dye can be applied after preliminary preparation. Wait 12 hours between coats. It is applied by thinning with 5-10% synthetic thinner for applications with brush and roller.

  • R10 Flammable

    R48/20/21 Harmful: danger of serious damage to health if swallowed, inhaled, in contact with skin

    Security Warnings:

    S2 Keep out of reach of children

    S24/25 Avoid eye and skin contact

    S29 Do not discharge into sewers

    S45 In case of accident or if you feel unwell, seek medical advice immediately

    Use S51 only in well-ventilated areas

    Keep the S7/9 container tightly closed in a cool, well-ventilated place

PRODUCT APPLICATION IMAGES