Easily adhering to the surface it is applied to, Latex has high coverage. Latex, which does not swell, can be applied easily without leaving any marks and dries quickly, also has water-removal properties. Since it has a water-based structure, it does not have an unpleasant odor and can be inhaled.

All clean and dry interior surfaces with floor preparation.

Structure: Styrene Acrylic

Consumption: 6 – 10 (m²/lt), 100-150 (g/m2)

Thinning rate: 10-15%

Application tools: Brush, Roller.

Drying: 15-20 minutes to the touch, 2 hours to dry completely.

Viscosity: 125 KU ± 10 ( 23 º C )

pH (25oC): 8 – 9

Density: 1.67 ± 0.02 g / ml

Solid matter content: ( 64 ± 2 ) %

The application surface should be free of all kinds of dust, dirt and oil. The swollen and old painted surfaces are scraped, the defects and cracks on the surface are filled with suitable putty and sanded to obtain a clean, dry and solid surface. Latex is applied 8-12 hours after the appropriate primer is applied to the ready floor. Latex is diluted 10-15% with clean water and applied in two layers by roller, brush or spraying method. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

Storage life is at least 1 year under room conditions.

20kg, plastic buckets.