Thanks to its water-based structure, Universal, which does not harm human health and the environment, allows the application of water-based paint to surfaces on which interior and exterior and synthetic paint have been applied. Universal ensures that water-based paint adheres well to the surface, as well as minimizes paint consumption thanks to its high coverage.

It can be applied to all old painted surfaces for which the floor has been prepared, interior and exterior surfaces such as concrete, plaster, concrete plaster, betopan, glass textile and paintable wallpaper.

The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained by applying the primer. If necessary, defects and cracks on the surface should be repaired with Putty. Izolac should be used on newly painted and absorbent surfaces, Primer on old painted, dirty or synthetic painted surfaces, and Putty Primer on putty applied surfaces. Universal is diluted with 10-15% clean water and applied as a single layer by roller, brush or spraying method. After the application is over, the tools used should be cleaned with water immediately. Before the paint is used, it must be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

It can be stored for at least 2 years in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bucket lid.

15 lt, 7.5 lt, 2.5 lt plastic buckets.