Marmarit, which appeals to personal taste with its marble patterned structure and velvety texture, does not crack thanks to its flexible structure as well as having high covering power. The glassy surface it creates is highly erasable. Since it is water-based, it does not harm human health and the environment.

It can be applied to all old painted surfaces for which the floor has been prepared, interior surfaces such as concrete, plaster, concrete plaster, betopan, glass textile and paintable wallpaper.

Structure: Styrene Acrylic

Consumption:: 4.5-5.5 (m²/lt), 250-300 (g/m2)

Thinning Ratio: Ready to use. It is applied without thinning.

Drying Time: 30 – 45 minutes to the touch; Dust free 1- 1.5 hours; Full drying 24 hours

Amount of Solids: 65±2%

Density: 1.57 ± 0.02 ( g / ml )

The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If the surface is not flat, a flat and smooth surface should be obtained with Acrylic Putty in order to apply marmarit. If the surface to be applied is smoothed with gypsum plaster, before applying Marmarit, Izolac should be used on the surface, Primer should be used on smooth but old painted, dirty or synthetic painted surfaces, and Putty Primer should be used on surfaces with putty application. Marmarit is applied in 2 layers without diluting it with the help of a trowel or spatula. Depending on the air temperature, wait at least 4 hours between coats. After the 2nd layer application has dried, Marmarit is applied to the material surface with diagonal and horizontal-vertical intermittent strokes with a spatula or trowel, again without diluting, for the final layer pattern. Afterwards, the over-applied paints on the surface are taken in the form of stripping without disturbing the patterns, and the surface is made smooth. As a final operation, by applying pressure to the trowel, the entire surface is lubricated and polished with right-left, up-down and circular movements. Different colors can be worked together. After the application is over, the tools used should be cleaned with water immediately. Before using the marmarit, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to form a solid surface in order to ensure better adhesion.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bucket lid.

12 kg, 4 kg plastic bucket.