Providing a pearly bright and special appearance thanks to its pearlescent structure, Metalic also allows different pattern applications. It has a high degree of erasability. Thanks to its water-based structure, it does not harm human health and the environment.

It can be applied to all old painted surfaces for which the floor has been prepared, interior surfaces such as concrete, plaster, concrete plaster, betopan, glass textile and paintable wallpaper.

Structure: Pure Acrylic

Consumption:6 -8 m² / lt (bumper, wood pattern etc.), 20-30 m² / lt (Leopard pattern etc.), 125-170 (g/m2)

Thinning Ratio: 10% max.(With Clean Water)

Drying Time: 15 – 20 minutes to the touch; Dust free 1 hour; Full drying 24 hours

Density: 1.04 ± 0.02 (g / ml)

The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If the surface is not flat, a flat and smooth surface should be obtained with Acrylic Putty in order to apply Metalic. If the application surface is flattened with gypsum plaster, before the Metalic application, Izolac should be used on the surface, Primer should be used on smooth but old painted, dirty or synthetic painted surfaces, and Putty Primer should be used on putty applied surfaces. After the primer application dries, Metalic is applied to the floor in two layers. Wait at least 2 hours between coats. Metallic is thinned with water according to the desired pattern and applied in one coat evenly with the help of a roller or brush. Metalic is applied in a volume of 10-20 m2 and immediately after that, a pattern is given with special effect hand tools (buffer, brush, spatula, chamois, etc.). With the same method, other surfaces are gradually completed. Different colors can be worked on top of each other in the spatula pattern. After the application is over, the tools used should be cleaned with water immediately. Before using Metalic, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface should be sanded first to create a solid surface in order to ensure better adhesion.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

It can be stored for at least 2 years in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bucket lid.

10 kg, 3 kg.1KG plastic bucket.