-
Product Description:
Acrylic copolymer binder based, cracking fluid for cracking patterns.
-
Features:
Crack, which creates antique-looking spaces thanks to its cracking patterns, does not harm human health and the environment thanks to its water-based structure.
-
Applications:
It can be applied to all old painted surfaces for which the floor has been prepared, interior surfaces such as concrete, plaster, concrete plaster, betopan, glass textile and paintable wallpaper.
-
Technical Data:
Structure: Styrene Acrylic
Consumption:12 – 18 (m²/lt), 70-110 (g/m2)
Thinning Ratio: Ready to use.
Drying Time: 6 hours
pH (25oC): 4- 4.5
Density: 1.02 ± 0.02 (g / ml)
-
Application:
The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. It is thinned with an average of 5% water to facilitate crack roller movement and applied to the surface with a brush or roller. It completes its drying in 6 hours depending on the air temperature. Silicone Paint (glossy or matte) in the desired color is applied with a brush in vertical movements (up-down) as a topcoat. After a short time the paint starts to crack. After the application is over, the tools used should be cleaned with water immediately. Silicone Paint (Gloss-matte) is applied on the floor by diluting it with 10% water. Silicone Paint (Gloss-matte) is applied by diluting with 10% water in the last coat application. Since the patterns will change according to the scan, a careful and homogeneous scan should be done. If overscanning is done, the cracking pattern will be fine. Before the paint is used, it should be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period.
-
Warnings:
S2: Keep out of reach of children.
S24/25: Avoid contact with eyes and skin.
S46: If swallowed, seek medical advice immediately; show the container or label.
Store the product in a tightly closed container.
Do not pour into the sewer.
-
Storage:
It can be stored for at least 2 years in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bucket lid.
-
Packaging:
3 kg, 1 kg plastic bucket.
Effect / Decorative
Picasso Paint
PRODUCT APPLICATION IMAGES
Effect / Decorative
OUR PRODUCTS