With its pearlescent structure, Symbol offers a special pearl-like semi-gloss and matte velvet look, and allows different pattern applications. With its water-based structure, it does not harm human health and the environment.

It can be applied to all old painted surfaces for which the floor has been prepared, interior surfaces such as concrete, plaster, concrete plaster, betopan, glass textile and paintable wallpaper.

Density: 1.16± 0.02 (g / ml)

Consumption: 3,5-4 (m² / lt), 250-350 (g/m2)

Thinning Ratio: Ready to use.

Drying Time: 30-45 minutes to the touch; Dust free 1 hour; Full drying 24 hours

The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If necessary, defects and cracks on the surface should be repaired with Acrylic Putty. If the surface to be applied is smoothed with gypsum plaster, Izolac should be used on the surface before Silicones matt application, Primer should be used on old painted, dirty or synthetic painted surfaces, and Putty Primer should be used on putty applied surfaces. Topcoat: Silicones matt in Symbol color is applied in one coat. It is applied to the surface with the help of a Symbol roller. The product is patterned with circular movements with the help of a special trowel before it completely dries on the surface. The surface is left to dry for 4-6 hours depending on the weather conditions. After the first coat has dried, the second coat of Symbol is applied with the help of a decorative trowel or roller to form a thin layer on the surface. After the application, without waiting for the surface to dry, the surface is patterned with circular movements with the help of a special trowel. After the application is over, the tools used should be cleaned with water immediately. Before the paint is used, it must be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period. If the application will be made on very glossy and glassy surfaces, the surface should be sanded first to create a solid surface in order to ensure better adhesion.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

The product can be stored for at least 2 years in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bucket lid.

10 kg, 3 kg 1 KG plastic bucket.

— The application surface should be cleaned of all kinds of dust, dirt and oil, the swollen old paints should be scraped thoroughly, a clean, dry and solid surface should be obtained.

— If the surface is not flat, a flat and smooth surface should be obtained with Acrylic Putty in order to apply Silicones matt.

— If the application surface is smoothed with gypsum plaster, before applying Silicones matt, Izolac should be used on the surface, Primer should be used on smooth but old painted, dirty or synthetic painted surfaces, and Putty Primer should be used on putty applied surfaces.

— Same color Silicones matt is applied as a single coat as a primer.