Elastic, which is elastic, solid, flexible, durable, resistant to mechanical impacts and provides superior water impermeability when dry, has been developed for waterproofing.

It is used on all walls, floors, roofs, terraces and similar floors where water isolation is needed.

Structure: Liquid plastic

Consumption: 1-1,3 (m2/lt), 700-1000 (g/m2)

Thinning Ratio:Ready to use

Application Tools:Brush, Roller.

Drying:6 Hours to Dry; 24 Hours to Full Dry

Density:1.33±0.02 ( g / ml)

Solid content:( 66.5 ± 2 )%

Dry film thickness:( 900 ± 100 ) Micron

Wet film thickness: ( 0.17 ± 0.2 ) cm

Viscosity: 115 KU ± 10 ( 23 º C )

pH (25oC): 8 – 9

The application surface should be free of all kinds of dust, dirt and oil. Defects and cracks on the surface are repaired with suitable putty and sanded to obtain a clean, dry and solid surface. Elastic is diluted with 40% water and applied like a primer. After the first layer dries, the second layer is applied without diluting the product. After the second coat is completely dry, the third coat is applied without diluting. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +30ºC.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

Storage life is minimum 2 years under room conditions.

20 kg, 10 kg, 3.5 kg plastic buckets.