Used for better adhesion of topcoat paints, reducing paint consumption and obtaining a homogeneous surface on exteriors, mineral-based and absorbent surfaces.

Applied to slippery floors where a new and old painted and toothed floor is desired, such as walls, ceilings, wood, plaster.

Structure:Acrylic Copolymer

Consumption: Single Layer: 12-16 (m²/lt) ; Two Floors: 5 - 7 (m²/lt)

Thinning Rate:With 30-40% water

Application tools: Brush, Roller.

Drying: It varies between 4 and 12 hours depending on the air temperature.

Viscosity: 115 KU ±10 ( 23 º C )

Density:1.62 ± 0.05 ( g / cm³ )

pH: 8-8.5

Solid content: ( 69 ± 2 ) %

Oil, dirt, rust, dust and old paint residues that will reduce the adhesion on the surface are scraped and a dry and clean surface is obtained. Acrylic Primer can be applied after the cracks on the surface are smoothed with suitable putty and sanded. Application details: Not applicable at temperatures below (+) 5 degrees and in rainy weather.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

It can be stored for at least 2 years in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bucket lid.

20 KG plastic bucket