It is a silicone modified exterior top coat paint with superior adhesion and water repellent power. Thanks to its silicone content, Silicon Paint, which provides less wetting and fast drying of the surfaces, does not swell or spill on the surface. In addition to being resistant to the harmful effects of rain water, snow water and sun rays, it has high resistance to the corrosive effect of sea water in places close to the sea.

It can be easily applied on the exterior of buildings, thin plaster, gypsum plate, exposed concrete, concrete plate and similar construction elements.

Structure: Pure Acrylic

Consumption: Single Coat: 6-10 (m²/lt), 100-170 (g/m2)

Thinner: Water

Thinning Rate: 10-15%

Density: 1.57 ± 0.02 ( g / ml )

Drying Time: Touch 15 – 20 min; Dust Retention 1 hour; 24 hours to Full Dry

Viscosity: 115 KU ± 10 ( 23 º C )

pH (25oC): 8 – 9

Brightness: Class G3 Matte (TS EN 1062-1)

Dry Film Thickness: Class E2 (TS EN 1062-1)

Grain Size: Class S1 (TS EN 1062-1)

Water Vapor Transfer Rate: Class V1 (TS EN 1062-1)

Water Transfer Rate: Class W3 (TS EN 1062-1)

Crack Covering Feature: Class A0 (TS EN 1062-1)

Carbon Dioxide Permeability: Class C0 (TS EN 1062-1)

Wet Film Thickness: ( 90 ± 5 ) micron

The application surface should be cleaned of all kinds of dust, rust, dirt, oil and old paint residues. After the cracks on the surface are smoothed with Putty and sanded, a clean, dry and solid surface should be obtained by applying the Primer. Silicon Paint is applied in 2 layers by diluting 10-15% with clean water for the first layer, and thinning with 5-10% water for the second layer, by roller, brush or spraying method. Depending on the air temperature, wait at least 2 hours between coats. After the application is over, the tools used should be cleaned with water immediately. On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. Before the paint is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface should be sanded first to create a solid surface in order to ensure better adhesion.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

In a cool, clean and dry environment, away from direct sunlight, the bucket lid It can be stored for at least 2 years without opening.

4KG, 10KG,20KG plastic buckets.