Lux Ceiling is a white ceiling paint with an extra matte appearance and high covering power. It integrates with the surface it is applied to and does not leave a roller or brush trace after application. Since it is water-based, it does not harm human health and the environment, it can be inhaled.

It can be applied to all old painted surfaces for which the floor has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan, glass textile and paintable wallpaper.

Structure:Styrene Acrylic

Consumption: Single coat: 6-10 (m²/lt), 95-140 (g/m2)

Thinning Rate: 10-15%

Application Tools: Brush, Roller.

Drying: Touch 15 – 20 min; Dust free 1 hour; Full drying 24 hours

Viscosity: 130 KU ± 10   ( 23 º C )

pH (25oC): 8 – 9

Density: 1.62 ± 0.05 (g / ml)

Dry Film Thickness: ( 40 ± 5 ) micron

Wet Film Thickness: ( 90 ± 5 ) micron

Covering Power: Class 2 (8m2/lt) (TS EN 13300)

Grain Size: Fine (TS EN 13300)

Brightness: Class G3 Matte (TS EN 13300)

The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained by applying the primer. If necessary, surface defects and cracks should be repaired with Internal Acrylic Putty. Izolac should be used on newly painted and absorbent surfaces, Universal Primer on old painted, dirty or synthetic painted surfaces, and Putty Primer on putty applied surfaces. Lux Ceiling is thinned by 10-15% with clean water and applied in 2 layers by roller, brush or spraying method. Depending on the air temperature between coats, wait at least 2 hours. After the application, the tools used should be cleaned with water immediately. On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. Before the paint is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface should be sanded first to create a solid surface in order to ensure better adhesion.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

 It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

25 kg, 20 kg, 17.5 kg, 10 kg, 3.5 kg plastic buckets.