Thanks to its strong binder feature, it prevents the paint absorbency of the surface and ensures that the paint integrates with the surface and that the topcoat paint adheres well to the surface. Thanks to the film layer it creates, it prevents water permeability. It prevents premature drying and minimizes paint consumption. Thanks to its water-based structure, it does not harm human health and the environment.

 It can be applied to absorbent and dusty surfaces such as raw plaster, fine plaster, eternit, gross concrete, asbestos sheets, satin plaster, gypsum board.

Structure:Styrene Acrylic

Consumption: Single coat: 6 – 10 (m²/lt), 120-180 (g/m2)

Thinning Ratio: 60% – 70% Dilution.

Application Tools: Brush, Roller.

Drying: Touch 15 – 20 min; Dust free 1 hour; Full drying 24 hours

Density: 1.03 ± 0.02 g / ml

pH (25oC): 8 – 9

Dry Film Thickness: ( 20 ± 5 ) micron

Wet Film Thickness: ( 40 ± 5 ) micron

The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If necessary, defects and cracks on the surface should be repaired with Acrylic Putty. After the necessary cleaning on the surface, SX 2000 can be applied. Diluted with 60-70% clean water, SX 2000 is applied as a single layer by roller, brush or spraying method. After the application is over, the tools used should be cleaned with water immediately. On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. Before using SX 2000, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC.

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

 It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

15 lt, 5 lt, 2.5 lt plastic buckets.