-
Product description:
Acrylic copolymer binder based, interior surface smoothing putty.
-
Features:
Putty Putty, which is resistant to water and humidity, is ready to use and easy to apply. By covering cracks, pits and pores, it creates a solid and smooth surface for interior top coat paint. Thanks to its water-based structure, it does not harm human health and the environment.
-
Scope of application:
It can be easily applied to surfaces such as conventional plaster, exposed concrete, asbestos plates, gas concrete where a smooth and solid surface is desired.
-
Technical Data:
Structure: Styrene Acrylic
Consumption: Single coat: 500-1500 (g/m2)
Thinner: Not thinned, ready to use.
Drying Time: 15 – 20 minutes to the touch; Dust free 1 hour; Full drying 24 hours
pH (25oC): 8 – 9
Density: 1.87 ± 0.02 ( g / ml )
Solid Matter Amount: 75±2%
Dry Film Thickness: ( 400 ± 50 ) micron
Wet Film Thickness: ( 900 ± 100 ) micro
-
Application:
The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. Putty can be applied optionally on highly absorbent surfaces. Putty Putty can be applied after the necessary preparation is made on the surface. Putty Putty can be applied as one or two coats with the help of a trowel or spatula without thinning. Between coats or after the top coat putty application, Putty Putty should be allowed to dry and sandpaper should be applied. After the application is over, the tools used should be cleaned with water immediately. Before Putty Putty is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC..
-
Warnings:
S2: Keep out of reach of children.
S24/25: Avoid contact with eyes and skin.
S46: If swallowed, seek medical advice immediately; show the container or label.
Store the product in a tightly closed container.
Do not pour into sewer.
-
Storage:
It can be stored for at least 2 years in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the bucket lid.
-
Packaging:
4KG. 12KG 25kg, Plastic bucket
Interior Paint
Picasso Paint
Product Application Images
Interior Paint and Primers
OUR PRODUCTS